Water Eater® Water Evaporators

a proven system for minimizing wastewater disposal costs

Water Evaporators

Water Eater® water evaporators drastically reduce wastewater disosal costs

portfolio1 portfolio2 portfolio3 portfolio4

Heading 1

This is an example of the content for a specific image in the Nivo slider. Provide a short description of the image here....

Heading 2

This is an example of the content for a specific image in the Nivo slider. Provide a short description of the image here....

Heading 3

This is an example of the content for a specific image in the Nivo slider. Provide a short description of the image here....

Heading 4

This is an example of the content for a specific image in the Nivo slider. Provide a short description of the image here....

downdraft table collage Family of laser markers Ultrasonic cleaning Call us for additional information

Solving Engineering, Manufacturing & Production Challenges!

get in touch

Water Eater® Model 125E Wastewater Evaporator


The Model 125E is an electrically heated waste water evaporator designed for the small to medium sized generator of wastewater. It comes in two models, the Model 125E Carbon Steel version and the Model 125E-SS 316L Stainless Steel version (tank, floor, lid, covers, and stack are 316L SS). Typical applications include minimizing wastewater from machining operations, parts washing equipment, compressor condensate, mop water, die cast solutions, and many other water based waste streams. Installation is easy consisting of only an electrical hookup and a 10" diameter vent stack. The unit can be filled three different ways: (1) Using the supplied 2" coupling on the top of the unit; (2) Remove the lid and manually pour in fluid; or (3) Using the optional 70 GPM self priming fill pump. After an initial heat up time of approximately one hour, the Model 125E will evaporate from 10 to 14 gallons per hour of water. The Model 125E will automatically shut itself down via a low level control. A secondary high temperature shutoff is also provided. When a cycle is completed the waste material can either be drained via a 2" drain opening, vacuumed out of the unit through the removable lid, with a wet/dry vacuum or pump, or, if it is a solid material, scooped out. Model 125E Water Eater water evaporator
10 to 14 GPH
Electric Heat
125 Gallon Capacity

FEATURES & BENEFITS
  • Heavy Duty 12 Gauge Tank, Covers, & Stack (Carbon or 316L Stainless Steel)
  • Available in 240V or 480V configuration
  • Automatic Shutoffs (Low Level Control & High Temperature Shutdown) for unattended operation
  • Simple one button ON/OFF operation
  • Removable Lid and obstruction free tank floor for fast and easy cleanout
  • Fully Insulated Tank
  • Variable weir skimmer standard on all units
  • Power exhaust allow venting to outdoors
  • Quality polyurethane finish
  • Tank Top at convenient 36" height to facilitate cleanout
  • Easily installed requiring only a vent stack and electrical hookup
  • Industry Standardized Components. Most parts are available from major industrial supply houses. You are not held hostage by high mark up on "captive" parts only available by the original equipment manufacturer.
  • Optional 70 GPM Self Priming Feed Pump
  • Optional Auto Fill System
  • One Year Warranty on Parts & Workmanship

SPECIFICATIONS    
  Maximum Evaporation Rate batch fill mode: 14 gallons/hour (53 liters)
auto fill mode: 10 gallons/hour (37 liters)
 
  Tank Capacity 125 gallons (473 liters)  
  Tank Construction 12 gauge tank with 1" insulation;
16 gauge painted exterior
 
  Tank Height 36"  
  Skimmer adjustable weir ball valve  
  Tank Fill Port 2" NPT coupling  
  Heating System elevated, electric
27,000 watts
 
  Dimensions (L x W x H) 38"L x 35"W x 54"H
38"L x 45"W x 54"H (with pump or auto fill system)
 
  Utility Requirements 240V / 3 phase / 68 amps
optional 480V / 3 phase / 34 amps
 
  Drain funnel floor; 2" drain with plug  
  Vent Stack 10" diameter  
  Shipping Weight 500 lbs.  
  Warranty one year parts & workmanship
labor & corrosion excluded
 

slide up button